TV/Monitor Mounts

Screw stops turning preventing proper installation

  Applies to the Following Product: - Full Motion TV Mount - 36" to 65" (CE-MT0912-S1)     Description: The mounting rails can not be properly attach because screw "N" stops after a few turns.     Solution: There are two solutions for this issue. 1. The problem seems to be excess material in each of the threaded holes. To fix, clean out the excess material from each hole. After this is done a LOT of extra material is removed and the screws are easily screwed...

Which SIIG TV mounts will fit Toshiba 42", model 42SL417U?

  Applies to the following products: - Full Motion TV Mount - 36" to 65"  (CE-MT0912-S1) - Low Profile Universal TV Mount 32" to 60" (CE-MT0612-S1) - Universal Tilting TV Mount 32" to 60" (CE-MT0712-S1) - Full Motion TV Mount 23" to 42" ( CE-MT0512-S1)     Description: In addition to matching the TV's screen size and weight requirements, make sure the SIIG TV mount also supports the mounting pattern of the TV.     Solution: The Toshiba 42" 42SL417U comes...

Will my TV mount support 24 inch studs?

  Applies to the Following Product: - Full-Motion TV Mount - 36" to 65" (CE-MT0912-S1)     Description: The studs in my wall are 24 inches apart will this mount install properly?     Solution: For proper installation, the maximum distance supported between the studs is 20 inches.        

How to Tighten Monitor Desk Mount Tilt Mechanism

  Applies to the Following Products: - Articulating Dual Monitor Desk Mount - 13" to 27" (CE-MT0Q11-S1) - Articulating Monitor Desk Mount - 13" to 27" (CE-MT0P11-S1) - Articulating Quad Monitor Desk Mount - 13" to 27" (CE-MT0S12-S1) - Articulating Triple Monitor Desk Mount - 13" to 27" (CE-MT0R12-S1) - Full-Motion Monitor Desk Mount - 13" to 27" (CE-MT0N11-S1) - Monitor Desk Mount - 13" to 27" (CE-MT0M11-S1)     Description: My monitor will not stay in upright position. &...

How to Tighten Full Motion TV Mount Tilt Mechanism

    Applies to the Following Product: - Full Motion TV Mount 36" to 65" (CE-MT0912-S1) - Full Motion TV Mount 23" to 42" (CE-MT0512-S1)   Description: I am not able to set the tilt to the desired angle. It only goes full tilt and I am not able to tighten the middle screw on either bracket to set the degree of tilt.       Solution: Sorry, it appears as if the installation instructions had a typo.  The correct screw to tighten is the top screws, the...

Mounting the TV off-center on the wall mount

    Applies to the Following Product: - Universal Tilting TV Mount - 32" to 60" (CE-MT0712-S1)   Description: Can the TV be mounted off-center on the wall plate?   Solution: Yes, the TV can be mounted off-center.  The extent and amount that you can adjust it from side to side is limited to the width of the mounting holes on your specific TV & the total width of the actual wall plate attached to your wall.    

Ceiling Mount Installation Template

    Applies to the Following Products:   - Ceiling Mount 32" to 60" Single (CE-MT0T12-S1) - Ceiling Mount 32" to 60" Dual (CE-MT0U12-S1)   Solution:   The attached printable template makes for a quick and easy ceiling plate installation.  Print the file on 8 1/2" x 14" Legal size paper to reproduce the proper dimensions of the ceiling plate.