Splitters

Using VGA monitor with DVI splitter

  Applies to the Following Products: - 1 x 2 DVI Splitter (CE-D20311-S1) - 1 x 4 DVI & Audio Splitter (CD-D20411-S1)     Solution: These splitters support DVI-D (digital) signal only. VGA monitors, connecting through a DVI to VGA adapter, will not work with these splitters.

No image showing on the display(s) connected to the Dual-Link DVI Splitter

  Applies to the following product: - 1 x 4 Dual-Link DVI Splitter (CE-D20511-S1) - 1 x 9 Dual-Link DVI Splitter (CE-D20611-S1)     Solution: The EDID of the display with the lowest resolution should be learned by the splitter.   1. Power off the splitter.  Disconnect all displays from the splitter. 2. Connect the display with the lowest resolution to the splitter’s DVI Output #3.  (Only DVI Output #3 is used to learn EDID) 3. Adjust the DIP switch...

EDID Learning for 1x2 Dual-Link DVI Splitter

  Applies to the Following Product: - 1x2 Dual-Link DVI Splitter (CE-D20211-S1)     Solution: 1.    Power off the splitter and all displays.2.    Disconnect all displays from the splitter.3.    Adjust the DIP switch to EDID Learning Mode (ON, ON). See attachment "DIP switch.jpg" below.4.    Connect the display with the lowest supported resolution to the splitters's DVI Out 2.  (Only DVI Out 2 is used to learn EDID...

Will the Dual-Link DVI Splitter support 3D displays?

  Applies to the Following Products: - 1x9 Dual-Link DVI Splitter (CE-D20611-S1) - 1x4 Dual-Link DVI Splitter (CE-D20511-S1) - 1x2 Dual-Link DVI Splitter (CE-D20211-S1)      Description:  I am working with 1920 X 1080 video being output at 120 Hz field rate for a 3D (stereoscopic) display. Will the Dual-Link splitter support this format?     Solution: The 1x4 Dual-Link DVI Splitter (CE-D20511-S1) supports 3D format displays.  However, the 1x9 Dual...

The maximun resolution supported by the splitter

  Applies to the Following Products: - 1x2 Dual-Link DVI Splitter (CE-D20211-S1) - 1x4 Dual-Link DVI Splitter (CE-D20511-S1)     Solution: The splitter itself has no resolution limitations, the source device and the connected monitor define the supported resolutions.    

No video signal when two or more monitors/TVs are connected.

    Applies to the Following Products: - 1x4 HDMI Splitter with 3D and 4Kx2K (CE-H21511-S1)       Description:  No video signal when two or more monitor/TV are connected.  No problem when only one monitor is connected.        Solution:  Updating the Splitter's firmware will fix this issue.   Please click link below to download new firmware and follow the steps below to update the firmware. http://www.siig.com...